A daily logic-circuit puzzle. Switches feed AND, OR, NOT and XOR gates that feed a row of lamps: work out which switches to flip so exactly the right lamps light up, in six tries or fewer. Same circuit for everyone, a new one every day.
Gatelit is a daily logic-circuit puzzle. A row of switches on the left feeds a network of logic gates, and the gates feed a column of lamps on the right. A goal strip tells you which lamps must glow and which must stay dark, and your job is to decide which switches to turn on so that every lamp matches at once.
The twist is that the board is dark while you work. Moving a switch costs nothing, but nothing lights up until you press Power on, and that spends one of your six tries. So you cannot flip things at random and watch what happens; you have to read the circuit and deduce the answer, using the tries only to confirm or to correct yourself. Only one combination of switches lights exactly the goal, and the game's generator checks this before a circuit is published.
It trains the same reasoning that underlies digital electronics and programming: following a signal through AND, OR, NOT and XOR gates, working backwards from an output to the inputs it needs, and keeping several constraints in your head at once.
How to play Gatelit, step by step
Read the Goal strip above the board. A yellow dot means that lamp must glow, a crossed-out circle means it must stay dark. All lamps must match at the same time.
Follow the wires from the lamps back to the gates and switches. Current always flows left to right, from the switches, through the gates, to the lamps. A solder dot means a wire splits to feed several places, while wires that cross without a dot do not touch.
Tap any chip to see its card, which lists every case and what comes out. This is free and worth doing whenever you forget how a gate behaves.
Flip the switches you think are needed. A switch is on when its lever is to the right and orange. Moving switches is free, and the board stays dark while you do it.
Press Power on. This spends one try, and each lamp then shows a tick if it matches the goal or a cross if it does not.
Use the result to correct your plan and try again. A combination you have already tried cannot be powered again. If all lamps match you have won; after six tries without the goal the day is lost and the winning combination is revealed.
Scoring and par
Your score is the number of tries you used. Lighting the goal on the first try is the best possible result, shown as 1/6, and a win on the sixth try is 6/6. If you spend all six without success the result is X/6 and the board shows the combination you were looking for. There are no stars and no par: fewer tries is simply better. Moving switches never costs anything, so only Power on counts.
When you share, each try appears as a row of lamps, lit or dark, followed by a tick or a cross. The grid shows how your search went but never which switches you chose, so it gives nothing away to someone who has not played yet.
How the week changes
Monday is the gentlest circuit: 4 switches, 2 lamps, and only AND and OR gates. Tuesday brings 5 switches, 3 lamps and the NOT gate, which flips its input. Wednesday keeps the same size and gate types, but a few more gates make some switches impossible to read off a single lamp, so you must combine two lamps to pin them down. Thursday adds the XOR gate and a sixth switch, while the number of lamps stays at 3.
Friday and Saturday both have 6 switches and 4 lamps, with all four gate types in play. Sunday is the largest: 5 lamps, each one sitting behind two layers of gates, so you have to trace a signal across two steps to reach a switch. Every circuit is new at midnight, and everyone sees the same one on the same day.
Strategy tips for Gatelit
Work backwards from the lamps. Start from a lamp and ask what it needs. A lamp that must glow behind an AND needs both of its wires carrying current, a dark OR needs both wires empty, and a NOT swaps whatever you needed. Keep going until you reach switches.
Settle the certain lamps first. If one switch feeds two lamps, it has to satisfy both, so begin with the lamp that tells you the most. A lamp that must glow behind an AND, for example, forces both of that gate's inputs on, while one behind an OR leaves several options open.
Save XOR for later. A lit XOR only says that exactly one of its two wires carries current, never which one. Leave it until another lamp has fixed one of its inputs, and the other input follows.
Change few switches between tries. Every tick and cross tells you which lamps are already right. If three lamps out of four are good, move only the switches that feed the failing lamp, so you can see exactly what that change did.
Frequently asked questions about Gatelit
Is there always exactly one answer?
Yes. Each day's circuit has a single combination of switches that lights the goal, so you never have to guess between two equally valid solutions.
Do I have to guess?
No. Everything you need is visible in the circuit and the goal, and the six tries are a safety net for slips in your reasoning rather than a place to guess.
Does moving a switch use a try?
No. Only pressing Power on spends one of the six tries. You can set the switches in any way, as often as you like, before you press it.
Why can't I power the same setting again?
Because you already know the result of that combination, so repeating it would waste a try. The game asks you to change at least one switch.
Can I play older circuits, and does it work without a mouse?
The archive keeps every past circuit, and playing those does not touch your stats or streak. On a computer, keys 1 to 8 flip the switches and Enter powers on; on a phone everything is tap.